On May 30th, Miss Vivian, nagpadala sa amin ng isang pagtatanong tungkol sa aluminyo punched panel para sa dekorasyon ng backdrop. Matapos ang ilang araw na komunikasyon, gumawa kami ng consensus at nagpadala ng dalawang set ng mga sample na may dalawang magkaibang kulay sa Malaysia para sa check ng kalidad at pag install.
As the building is not finished, the actual size should be confirmed before moving forward, which took almost a month.
On September 13th, production drawing was confirmed. Mass production began. The products were loaded on October 5th.
Overall Introduction
Lokasyon: Malaysia
Lugar: roughly 173 mga metro kuwadrado.
Thickness of the panels: 2.5mm
Paggamot sa ibabaw: PVDF pag spray
Kulay: RAL 7040
Installation Method: seam installation
Corner bracket: countersink
Rib reinforcement: Not required
Details
Sample Confirmation
Installation Method Confirmation
Difficulty of the Project
Solution 1: Black glue: after installation, the overall effect is not satisfactory as shown below. This solution is not selected.
Solution 2: aluminum trim: too many angles among the panels, will be too difficult to cut and install onsite. Abandoned.
Final solution: using wood trim to caulk. This solution is suggested by Vivian and the effect is satisfactory.
Why seam installation instead of seamless splicing installation?
As there are lights behind the aluminum punched panels, if using seamless splicing installation, the maintenance of lamps will be inconvenient and also cost too much labor and money. Kasabay nito, as the wall of backdrop is not finished, considering that there will be tolerance, seamless installation will not be suitable.
Gayunpaman, if use seam installation, the problems above will not be problems.
Drawing Revision
Original Drawing：
Sukat：24440*6000mm
Revised Drawing：
Sukat：24440*4500mm
Production Drawing Confirmation
Produksyon ng Masa
Punching：
Pagbaluktot：
Welding：
Grinding：
Corner Bracket：
Polishing：
PVDF Spraying：
Paghahatid
At Alumideas , our products are widely used for exterior and interior in architecture and building, shopping mall, hospital, metro station, railway station etc. For multifunctional advantage like ventilation, decoration, partition, excellent in lights transmission and so on.
If any requirement for Aluminum decorative panel please contact us ! We will offer the best quote and service !
