On May 30th, Miss Vivian, ci ha inviato un'indagine sui pannelli perforati in alluminio per la decorazione dello sfondo. Dopo diversi giorni di comunicazione, Abbiamo fatto consenso e inviato due set di campioni con due colori diversi in Malesia per il controllo e l'installazione di qualità.
As the building is not finished, the actual size should be confirmed before moving forward, which took almost a month.
On September 13th, production drawing was confirmed. Mass production began. The products were loaded on October 5th.
Overall Introduction
Location: Malaysia
Zona: roughly 173 metri quadrati.
Thickness of the panels: 2.5mm
Trattamento superficiale: Spruzzatura PVDF
Colore: RAL 7040
Installation Method: seam installation
Corner bracket: countersink
Rib reinforcement: Not required
Details
Sample Confirmation
Installation Method Confirmation
Difficulty of the Project
Solution 1: Black glue: Dopo l'installazione, the overall effect is not satisfactory as shown below. This solution is not selected.
Solution 2: aluminum trim: too many angles among the panels, will be too difficult to cut and install onsite. Abandoned.
Final solution: using wood trim to caulk. This solution is suggested by Vivian and the effect is satisfactory.
Why seam installation instead of seamless splicing installation?
As there are lights behind the aluminum punched panels, if using seamless splicing installation, the maintenance of lamps will be inconvenient and also cost too much labor and money. Allo stesso tempo, as the wall of backdrop is not finished, considering that there will be tolerance, seamless installation will not be suitable.
Tuttavia, if use seam installation, the problems above will not be problems.
Drawing Revision
Original Drawing：
Misurare：24440*6000mm
Revised Drawing：
Misurare：24440*4500mm
Production Drawing Confirmation
Produzione di massa
Punching：
Bending：
Saldatura：
Grinding：
Corner Bracket：
Polishing：
PVDF Spraying：
Consegna
At Alumideas , I nostri prodotti sono ampiamente utilizzati per l'esterno e gli interni in architettura e costruzione, centro commerciale, Ospedale, stazione della metropolitana, Stazione ferroviaria ecc. Per un vantaggio multifunzionale come la ventilazione, decorazione, partizione, Eccellente trasmissione delle luci e così via.
In caso di requisito per il pannello decorativo in alluminio, contattaci ! Offriremo il miglior preventivo e servizio !
