Aluminum wall panels are an excellent alternative to traditional cladding options such as wood or windshields. Compared to other materials on curtain walls, aluminum’s strength and durability make it a perfect material for construction projects, and its lightweight makes installation a breeze. Alumideas offers all kinds of finishes such as decorative and durable wood grain, which adds a natural touch to any architectural project.
Pensijilan
ISO 9001:2015 | Sijil SGS | Kritikal kepada Pemeriksaan Kualiti
Keupayaan: | 1,200,000 meter persegi/Tahun |
bahan: | 1100H24 / 1060H24 / 3003H24 / 5005H24 |
Ketebalan: | 1.0 ~ 5.0mm semuanya tersedia |
Saiz: | 600*600 / 600*1200mm / 1220*2440mm(saiz standard)/ saiz tersuai |
Suraface: | Salutan roller / Salutan PVDF / Salutan serbuk |
Toleransi: | Lazimnya, Alumideas boleh mengekalkan toleransi ketebalan pemesinan ±0.2mm dan toleransi panjang atau lebar ±2mm. |
About how to install aluminum wall panels, as a facade panel manufacturer, we will offer fully guideline to our customers, here’s the installation short introduction:
1. Use vertical transportation equipment such as elevators to transport aluminum plates and accessories to each construction node.
2. The whole aluminum plate is connected with the keel through the surrounding aluminum corner codes (brackets) and fixed on the keel.
3. Fixing method: If it is built-in seamless splicing, drill at the corresponding position on the keel, and then riveted with a flat head (countersunk head) aluminum rivet; If it is seam splicing, use steel drill tail screws (also known as flange screws or phoenix screws) to directly drill into the keel through the holes of the aluminum corner code to stabilize the aluminum plate, but pay attention to control the tightness of the drill bit.
4. When trial assembly, pay attention to the installation accuracy, and adjust the aluminum plate before fastening.
5. When installing, the aluminum plate should be installed on the wall according to its serial number.
6. The installation of aluminum plates always starts from the front, large area, and corner parts, and is installed from top to bottom.
7. The connection between the aluminum plate and the keel must meet the requirements of the drawings, it must be firm and stable, and bolts must be installed.
Kami membantu anda mengelakkan perangkap dan memberikan anda penyelesaian yang tahan lama dan kos efektif tepat pada masanya dan mengikut bajet.
Pertukaran Maklumat Pantas Membantu Kami Melayan Anda Dengan Lebih Baik
Dapatkan sebut harga segera daripada perunding profesional kami.
Kami akan menghubungi anda dalam 1 hari bekerja, sila beri perhatian kepada e-mel dengan akhiran “@alumideas.com”.